Koolance ICM-505 User Manual download pdf (Page 19)

Installing the CPU Cooler

Temperature Sensor

Remove the protective ﬁ lm from the bottom of

the CPU cooler.

Insert the temperature sensor into either

bottom groove on the CPU cooler. The sensor

is required for proper fan speed control and

system safety features.

DO NOT attempt to install the temperature

probe in between the processor and cooler.

Despite its thin size, it will interfere with CPU

contact or burn-out the sensor.

Apply metal tape to keep the temperature probe in

place. DO NOT stick metal tape or the temperature

probe to the the raised (polished) portion of the

CPU cold plate.

You can use a zip-tie to further secure the

temperature probe wire to the CPU tubing.

CAUTION: Be sure to attach the Koolance temperature probe to the

CPU cooler during installation. The safety features of your system may

not function properly without the correct placement of this probe, and

hardware damage can result.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

No comments

Koolance ICM-505 User Manual Page 19