Koolance ICM-505 User Manual download pdf (Page 24)

User Manual

Finally, squeeze the remaining tabs together beneath

the board, and gently push them through with long-nose

pliers.

This should allow you to remove the CPU socket’s plastic

rentention frame from the motherboard.

From the top side, pull up both plastic center locking

bolts.

The included bracket clips are used to mount the

Cooler. Assemble the bracket by inserting these

clips into the center slider of the CPU Cooler.

Apply thermal paste to the CPU directly. Spread the

paste so that it evenly covers the CPU. A piece of

thick paper (such as a business card) works well

for this.

Ideally, the short screws with the Koolance AMD 64

Adapter kit are all that will be required to mount the

bracket. (These are standard ATX chassis screws.)

However, if the socket’s backplate is a different

design, the longer screws, plastic spacers, and nuts

may be needed to hold the bracket.

Short Metal Screws

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

No comments

Koolance ICM-505 User Manual Page 24